Wednesday 7 February 2018

Hieronymus Machine!

Symbolic Hieronymus Machine

A holiday gift from Aetheric Arts!
Build your own Symbolic Hieronymus Machine with these handy graphics.

Click on the images above for the high resolution versions. (Note: the dial is a separate image, so download both!)
The Symbolic Hieronymus Machine image can be downloaded and printed out, and should fit nicely on a Letter or A5 size sheet.
Construction:
1. Print out the Hieronymus diagram and the knob.
2. Mount the diagram and knob on a suitable backing. The easiest way to do this is take the printed sheet to a printing service and have it laminated. This gives you a suitable surface material from which to get stick reactions from the sensor pad. Also have the knob laminated, and cut it into a circle after laminating. (Note: don’t cut too close to the paper under the laminate – leave a few millimeters of plastic “framing” the images.)
3. For a high quality version, glue the laminated diagram to a piece of stiff plastic, bakelite or thin plywood (silicon “goop” is good for this.) Then mount rubber feet underneath at the corners. This give you a solid device that can sit on a tabletop.
3. Cut a small hole through the center of the knob, and another hole through the center of the dial on the diagram. Use a suitable length and diameter screw, washers and bolt to fasten the dial to the diagram, so it rotates freely.
An alternative to using a stiff backing is to use a piece of 1/4″ thick corkboard and attach the knob with a simple thumbtack.
Your Symbolic Hieronymus Machine is ready to use!
For complete instructions on using psionic machines in general, I refer the reader to the excellent description found in Charles “Uncle Chuckie” Cosimano’s book, Elementary Psionics, which can be downloaded for free here. (Thanks, Uncle Chuckie!)
Here are the particular instructions for using the controls of the Symbolic Hieronymus Machine.
Basic operation:
1. Prepare the machine for work by exposing to bright sunlight or by waving a strong magnet over it for at least ten seconds, a few inches above the surface in a random pattern.
2. (Optional) Place a power object, such as a crystal, talisman (or even a small watch battery) on top of the “POWER” section.
3. Place the witness sample on top of the round spiral (leaf clipping, hair, fur, photograph or other witness that represents the Target of the work.)
4. Stroke the stick pad while concentrating on the purpose of the working. Starting with the pointer on “0”, turn the tuning dial until a stick reaction is felt on the fingers stroking the pad. The easiest way to turn the knob is to rest one finger lightly on it to spin it. If you dial all the way to the “100” without a reaction, turn it back-and-forth and keep scanning until you get a reaction.
Alternatively, you can use a pendulum suspended over the Sensor Pad instead of using your fingertips. Tune the dial until you get a pendulum reaction.
5. Release your fingers from the stick pad (or remove the pendulum) and the Machine will continuously broadcast the tuned intention to the target.
Anything more complex (and there are many things more complex you can do with a Psionics machine) refer to Uncle Chuckie’s book above.

Wikipedia Article included here as well as the above..

Hieronymus machine is any of the patented radionics devices invented by electrical engineer Thomas Galen Hieronymus (21 November 1895 – 1988). Hieronymus received a U.S. Patent for his invention in 1949, which was described in the patent application title as a device for "detection of emanations from materials and measurement of the volumes thereof."[1][2]
Skeptics and scientists consider the devices to be an example of pseudoscience and quackery.[3][4][5]


Design and function[edit]

The original "Radiation Analyzer" consisted of a chamber to hold a sample of material, a glass prism to refract the eloptic emanations coming from it, and a copper wire probe on a rotating armature to adjust the angle formed by the prism and the probe. Supposedly, eloptic emanations are refracted by the prism at different angles depending on the material. The detected eloptic signals were fed to a three-stage vacuum tube RF amplifier and conducted to a flat touch plate surrounded by a copper wire bifilar coil.[1] By stroking the touch plate an operator could supposedly feel a sensation of "tingling" or "stickiness" when the eloptic energy was detected. As such, a human nervous system is considered to be necessary to operate a Hieronymus Machine.[6]
Hieronymus subsequently designed solid-state versions of his Analyzers, substituting germanium transistors for crystal prisms and tunable capacitors for the rotating armature. He also designed and built various specialized devices designed for specific functions, including analysis of living organisms and production of homeopathic remedies.[7] The most well-known Hieronymus Machine is the Eloptic Medical Analyzer, which supposedly analyzes and transmits eloptic energy to diagnose and treat medical conditions in plants and animals.
The theory of operation on which Hieronymus Machines are based is that all matter emits a kind of "radiation" that is not electromagnetic, but exhibits some of the characteristics of both light and electricity. The quality of this emanation is unique to every kind of matter, and therefore can be utilized for detection and analysis. Hieronymus coined the term "eloptic energy" to describe this radiation (from the words "electrical" and "optical".) All of his machines were designed to detect and manipulate this eloptic energy. Eloptic emanations have never been detected by instruments designed to measure electromagnetic energies, no other evidence of their existence have been produced, and there is no mathematical theory of an eloptic field, so the theory is considered pseudoscientific and is not accepted by mainstream science.

John W. Campbell and Hieronymus machines[edit]

The inventions of Hieronymus were championed by Astounding Science Fiction editor John W. Campbell in late 1950s and early 1960s editorials. A series of correspondences between the two men show that while Hieronymus was sure that someday his theories of eloptic energy would be proven and accepted by physical scientists, Campbell was convinced that the machines were based on psionics, related to the user's paranormal or ESP powers.[3]
As an example, Campbell believed one could create an eloptic receiver or similar device with the prisms and amplifiers represented by their cardboard or even schematic representations. Through the use of mental powers, such a machine would function as well as its "real" equivalent.[8] In his autobiography, Hieronymus wrote, "I appreciated Mr. Campbell's interest in my work, but over the years since then, I have concluded that he set back the acceptance of my work at least a hundred years by his continual emphasis on what he termed the supernatural or 'magic' aspects of a mind-controlled device he built by drawing the schematic of my patented instrument with India ink. The energy flowed over the lines of this drawing because India ink is conducting, but it isn't worth a tinker's damn for serious research or actual treating."[9]

Scientific reception[edit]

The claims of Hieronymus about "eloptic" emanations were heavily criticized by the scientific community as having no basis in reality. His machines have been compared to the quack devices of Albert Abrams and have also been described as an example of pseudoscience.[3][4]

Notes[edit]

  1. Jump up to:a b U.S. Patent 2,482,773
  2. Jump up^ Sampson, Wallace; Vaughn, Lewis. (2000). Science Meets Alternative Medicine: What the Evidence Says about Unconventional Treatments. Prometheus Books. p. 109. ISBN 1-57392-803-8
  3. Jump up to:a b c Gardner, Martin. (2012 edition, originally published in 1957). Fads and Fallacies in the Name of Science. Dover Publications. pp. 347-348. ISBN 0-486-20394-8
  4. Jump up to:a b Sladek, John Thomas. (1973). The New Apocrypha: A Guide to Strange Science and Occult Beliefs. Hart-David MacGibbon. p. 269
  5. Jump up^ Williams, William F. (2000). Encyclopedia of Pseudoscience: From Alien Abductions to Zone Therapy. Facts on File Inc. p. 146. ISBN 1-57958-207-9
  6. Jump up^ Hieronymus (1976), Pg. A-11
  7. Jump up^ Hieronymus (1976), pg. A-9
  8. Jump up^ Campbell, (August 1956)
  9. Jump up^ Hieronymus (1988), Part V, pg. 123-124

References[edit]

  • Campbell, John W. Jr. “Psionic Machine — Type One”, Astounding Science Fiction, June 1956, pp. 97–108.
  • Campbell, John W. Jr. “Correction and Further Data on the Hieronymous Machine”, Astounding Science Fiction, August 1956, pp. 112–114.
  • Goodavage, Joseph ; “An Interview with T. Galen Hieronymus”, Analog Science Fiction, January 1977.
  • Hieronymus, T. Galen & Sarah (September 1976). The Eloptic Directory. Advanced Sciences and Research, Inc (documentation for the Hieronymus Eloptic Analyzer machine).
  • Hieronymus, T. Galen (January 1988). The Story of Eloptic Energy. Institute of Advanced Sciences, Inc.

External links[edit]

A Psychologist Explains The Phenomenon Of ‘Reality Shifting’

  Mar 20, 2024, 08:30am EDT/Forbes Reality shifting refers to a practice where individuals attempt to shift their consciousness or awareness...